Skip to main content

FLEXIS P

Type

Output voltage
Output current
Input current

Product description

The FLEXIS P high-frequency charger with IP54 protection is designed for dusty rooms, damp areas and is also suitable for outdoor use. FLEXIS P is used in mines, railway applications, steel mills, metallurgical plants, airport ground support and other areas where environmental influences need to be dealt with.

The charger case is designed for hanging on a wall or can be equipped with a stand. Cooling is provided by fans at the top of the charger. The intake and exhaust openings are equipped with splash and dust resistant filters. All features and parameters are identical to the FLEXIS charger.

  • ARB charging curve for automatic recognition ang charging a battery
  • Special charging curve for the lithium batteries 
  • Opportunity charging - way of the charging battery during a rest time
  • Case with IP54 protection degree resistant to splashing water and dust
  • Possibility of the air-conditioned cabinet - for use at high temperatures
  • Possibility of the stainless steel charger case
  • For all battery types - charge curve selection
  • For different capacities - setting the charge current
  • For batteries from 2 up to 96 V - adjustable via panel or configuration software
  • Flexible modular system - easy service
  • Setting parameters on the front panel of the charger or from a PC
  • Memory for charging cycles, detailed information on the last charging cycle
  • Operating temperatures from -10 ºC to + 40 ºC, with air-conditioned case from -30 ºC to + 60 ºC
  • Regenerative battery care - desulfation (removal of sulphates from the battery by low current charging for long periods of time) and equalization (charging to balance voltage and electrolyte density of individual battery cells)
  • Maintenance charging (full capacity of unused battery)

Specification

Efficiency : 
up to 95%
Output voltage stability : 
+-1%
Cooling : 
active fans
Air pump : 
Degree of protection : 
IP54
Operating temperature : 
-10°C to +40°C
Safety class : 
1
Standards : 
EN 61000-6-2, EN 61000-6-4, EN 62368-1

Dimensions

Case Width Height Depth X Y
S 380 600 210 340 620
M 380 600 350 340 620
L 600 600 350 560 620
Pokud tabulku nevidíte celou, mužete s ní pohybovat doleva/doprava
Dimensions in milimetres [mm] X and Y are positions of mounting holes
IP54_dimensions_EN

Accessories

AXI FF SEN20DM
Temperature sensor for lead-acid batteries with 2.0 m cable. 
Detailed specification
AXI FF SEN37DM
Temperature sensor for lead-acid batteries with 3.7 m cable.   
Detailed specification
FLEXIS EUW2+
Extension board for the control system and air pump for FLEXIS chargers. The air pump ensures the circulation of the…
Detailed specification
FLEXIS EUW2
Extension board for the control system and air pump for FLEXIS chargers. The air pump ensures the circulation of the…
Detailed specification
FLEXIS EUW1
Extension board for the control system and air pump for FLEXIS chargers. The air pump ensures the circulation of the…
Detailed specification
FLEXIS EXT UNIT RS
Extension board for FLEXIS control unit. Allows connection to external accessories.
Detailed specification
FLEXIS EXT UNIT BM
Extension board for FLEXIS control unit. Allows connection to external accessories.  
Detailed specification
FLEXIS EXT UNIT
Extension board for FLEXIS control unit. Allows connection to external accessories.
Detailed specification
AXI FF STARTSTOP
External START and STOP buttons. 
Detailed specification
AXI FF RAMI R/G
Extension set for big chargers Contains: External light signalisation red / green Drive-off…
Detailed specification
AXIM983x
Battery identification module with temperature sensor and electrolyte level sensor.
Detailed specification
AXIM982x
Battery identification module with temperature sensor.
Detailed specification
AXIM981x
Battery identification module.
Detailed specification
AXI FF 3LED
Modular signaling column WERMA with three parts, green, yellow and red. Optical signaling located on the top of the…
Detailed specification
AXI FF 2LED
Modular signaling column WERMA with two parts, green and red. Optical signaling located on the top of the charger…
Detailed specification
AXI KONZOLA UNI P3
Stand for cases with degree of protection IP54.
Detailed specification
AXI FF 1LED
Modular signaling column WERMA with one part, green. Optical signaling located on the top of the charger provides a…
Detailed specification